Anti Rattle D Clamps Ball Mount Tightner #18197

Use this hitch immobilizer to keep your hitch-mounted accessories from rattling and shifting in your receiver. Great for tow bars and high-low adapters. Quick, simple bolt-on installation.

• Application: most 2" x 2" trailer hitch receivers
• Inside height: 2-1/2"

Inside width: 3-1/8"

Nearly every hitch setup suffers from a bit of slip. This free play between your trailer hitch receiver and your hitch-mounted accessory is completely normal, but it's also completely preventable. By adding the Anti Rattle Hitch clamp to your setup, you can stabilize your hitch-mounted accessory as it sits in the receiver to eliminate rattle, sway, and all that extra play.

 Just slip the Anti Rattle Hitch clamp over your tow bar or hitch adapter. When you slide the accessory into the hitch receiver, position the top of the U-bolt around the collar of the hitch. Tighten the bolts so that the shank of your accessory is pulled up towards the top of the receiver opening, thus securing it in place within the tube.

 Note: If you have a towing setup that includes a drop receiver or high-low adapter, use two immobilizers to make your system as secure and rattle-free as possible. Use one Anti Rattle Hitch clamp at the connection point between the adapter and your hitch, and use the other where your tow bar slides into the adapter.